MGI JETvarnish 3D One DIGITAL PARTIELL UV-LACK

  • 6. October 2022 15:49
  • Germany
  • 540 views
Popular
MGI-JV3D-ONE-2021-6
MGI-JV3D-ONE-2021-1
MGI-JV3D-ONE-2021-2
MGI-JV3D-ONE-2021-3
MGI-JV3D-ONE-2021-5
MGI-JV3D-ONE-2021-6
MGI-JV3D-ONE-2021-1
MGI-JV3D-ONE-2021-2
MGI-JV3D-ONE-2021-3
MGI-JV3D-ONE-2021-5

Overview

  • Category : Varnishes, laminators.

Description

DIGITAL PARTIELL UV-LACK

MGI JETvarnish 3D One

Year 2021
Conditions like new
In production

– On-the-fly drying & curing with integrated LEDs
– No additional drying time required
– Ozone-free and without heat thanks to LED technology
– Low power consumption
– Ideal for lucrative short and medium print runs
– Fast make-ready
– No plates or screens needed
– All that’s required is a digital mask
– Wide range of substrates possible
– Varnishing on toner without lamination
– Varnishing on offset prints
– Accurate sheet-to-sheet registration with
the AIS SmartSanner technology
– Quick and easy setup supports digital
printing business model

Printing technology
MGI’s exclusive inkjet engine technology; Drop-on-Demand (DoD)
technology; Piezoelectric printheads,developed and manufactured
by Konica Minolta; Single pass printing; Flexible & scalable printing
architecture

Coating thicknesses
Depending on your file, the inks used and the type of surface of
your sheet, the coating thickness can vary. On laminated and
aqueous coating: 21 µm – 116 µm for 3D raised effects and tactile
finish. On toner and coated paper: 30 μm – 116 µm for 3D raised
effects and a tactile finish

Production speed
In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 µm)
In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 µm)
Up to 547 A3 sheets per hour (with 116 micron)

Registration
SmartScanner coupled with Artificial Intelligence (AIS) for fully
real-time automated sheet-to-sheet registration process. No crop
marks required.

Formats
Min. 21 x 29.7 cm
Max. 36.4 x 76.0 cm
Max. Printable Width 35.3 cm

Substrate thickness
Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
& lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing & lamination; Motorized height-adjustment
print heads

Substrates*
Printing on most matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other
coated materials.

Varnish on toner
Spot 3D One coat directly onto most digital prints with no
lamination or coating required.

UV coatings andcapacity
varnish delivered with a 10-litre tank capacity

High capacity
Feeder able to handle a paper pile up to 30 cm;

Automatic feeder
2,500 sheets at 135 g/m2

Paper Tray
Tray able to handle a paper pile up to 15 cm or approximately
1,250 sheets at 135 g/m2
All paper formats from A4 up to 36.4 x 75 cm

Paper path
100% flat paper path; Vacuum feed system; Air feed system;
Automatic double sheet detection; In-line LED dryer; “On-the-fly”
drying & curing via integrated LED

MGI JETvarnish 3D One DIGITAL PARTIELL UV-LACK
MGI JETvarnish 3D One DIGITAL PARTIELL UV-LACK